The FT14HC is ball float steam trap having stainless steel working internals and integral automatic air venting facility. Trap is installed horizontally, threaded connectionsAvailable types
High capacity - As standard the FT14HC is available with flow direction in either left-to-right or right-to-left direction.
Please state preference when placing an order.
Note: These ball float steam traps are available with either 4.5, 10 or 14 bar internals (PMX).
Sizes and pipe connections
DN15-DN25,screwed BSP or NPT.
|Body design conditions
|PMA Maximum allowable pressure
||25 bar g
|TMA Maximum allowable temperature
|Minimum allowable temperature
|PMO Maximum operating pressure for saturated steam service
||21 bar g
|TMO Maximum operating temperature
|Minimum operating temperature
|PMX Maximum differential pressure
|Designed for a maximum cold hydraulic test pressure of 38 bar g|
Ball Float and Lever:Stainless Steel
Additional cold water capacities from the thermostatic air vent under start-up conditions
Capacities shown above are based on condensate at saturation temperature. Under start-up conditions when the condensate is cold the internal thermostatic air vent will be open and provides additional capacity to the main valve.