Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2019-12-15 23:28
327
Company Profile
Jiangsu Sinova Technologies Co., Ltd.By certification [File Integrity]
Contact:jspengbo(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Features:
Item |
Specification |
Model |
Various |
Size |
Customized |
Material |
40Cr / 60Si2Mn / 20CrMn / GCr15 |
Application |
Animal Feed Pelleting |
Applicable Animal |
Shrimp, Fish, Poultry, Swine, Cattle |
Treatment |
Heat Treatment |
Processing Type |
Pressing |
Outer Diameter |
150mm -500mm |
Pitch |
Customized |
Trademark |
SINOVA |
HS Code |
8436990000 |
Condition |
Brand new |
Hardness |
60-65HRC |
Service Life |
No less than 400-600hours* |
Payment Term |
TT / LC |
Incoterms |
EXW / FOB / CFR / CIF |
Courier |
Sea / Air / Express |
Transport Package |
Wooden Case / Plywood Case |
Origin |
Jiangsu, China |
*The service life is based on Sinova’s R&D Lab data. The actual life is decided by several factors such as operation level, raw material quality,
formula composition etc.
Why Sinova:
Aspects |
SINOVA |
Other Suppliers |
Global Team Experience |
More than 12 years |
Few |
Raw Material Source |
Europe Standard |
Unknown |
Lead Time |
15 days** |
Min. 30-60 days |
Consignment Trace-ability |
Yes |
No |
Online Service Availability |
24*365 |
8*260 |
With Sinova closed end grooved roller shell, you could ensure: |
1. The feed mill’s stable running; |
2. Up to 30% of cost could be saved; |
3. As long as 15-30 days of waiting could be avoided; |
4. Fast response to your concern is always available; |
5. Getting the whole procedure of delivery under your control. |
Advantages:
Quality control
All Sinova roller shells are extensively checked on quality, hardness, and dimensional stability.
Longer service life
Skillful team, advanced facility and precise processing technology guarantee wear-resistance and even wear.
FAQ:
1.Q: What is key point of roller shell usage?
A:1)Select right die hole compression ratio
2)Correctly adjust the working clearance between ring die and roller, from 0.1 to 0.3mm.
3)New die should match new roller to use. Roller connecting with ring die must be loose in the front and tight at the back.When sharp corners are watched at two sides of roller, blunt the flange part with hand grinder so as to have a good connection between roller and ring die.
4)Before raw material being fed into pellet mill, pre-cleaning and magnetic separation treatment is necessary to minimize iron impurities getting into die hole. Regular inspection on the die hole is also essential to see whether the die is blocked or not and clean the blocked die hole if any.
5)If plastic deformation happens to ring die guiding material cone hole,causing hole shrinking, it must be repaired. During repairing, pay attention to that the lowest height of ring die inner surface must be 2mm higher than the bottom of overtravel groove.
2.Q:How long is the service life of roller shell?
A:As per Sinova’s test results, it could service for 400-600hours. The actual life will be decided by several
factors such as operation level, raw material quality, formula etc.
3.Q:What brand of roller shell could you supply?
A:Sinova could make customized roller shell as long as you have the dimension. Normally the major pellet mill suppliers include Andritz, Buhler, CPM, Idah, Kahl, Lameccanica,
Muyang, PTN, Van Aarsen, Zhengchang. Sinova is able to provide roller shells for the above mentioned pellet mills.
http://www.stcdie.com/